|
|
| |
HOW MANY TIMES CAN YOU TAKE THE EIT/PE EXAMS ?
NCEES HAS
IMPLEMENTED a
national ID system
to identify AND
TRACK repeat exam candidates
This is to enforce a
nationwide limit of 3 takes |
|
Users who fail the licensure exam for the THIRD time may face
all of these consequences: |
|
1. will not be able to take the exam in another jurisdiction |
|
2. must petition to be
readmitted to the exam, only if the petition is
approved will the following actions be taken |
|
3. the candidate will be
barred from taking the exam for 1 year |
|
4. the candidate may be
required by state boards to take up to 24 credits in engineering courses |
|
5. the candidate will be
limited to taking the exam only once per year |
|
read more |
| |
| From
Ncees Publications |
We will begin
using the NCEES examinee management system for the
October 2010 administration.
When exam candidates log on to the NCEES Web site to
register for the exam they intend to take,
NCEES will issue them a unique identification
number.
Candidates will use their ID anytime they take an
NCEES exam in the future.
This centralized system will allow member boards to
track a candidate’s attempts at an exam across
jurisdictions,
strengthening exam security and allowing boards to
better enforce limits on exam attempts.
|
| |
| When
you max out your exam-takes |
| you may end up setting
back your license by 5 years |
| DO NOT WASTE your
valuable exam-takes on
useless refreshers or hard to understand study-guides |
| |
|
Traditional EIT-FE/PE refreshers offer 30 contact hours at $ 1000 to $
2000
|
| with 2
hours of review per exam-subject |
|
Example: Rensselaer University = $ 1750 |
| |
|
The ENSYS 1000 hour EIT-FE
Training Program |
| is the
ONLY
SERIOUS review program designed
for users out of school many years |
| is an
engineering
re-education program |
| it
reteaches the entire fundamental
engineering curriculum |
|
with
80 hrs of training per exam-subject |
| |
| To
pass the EIT-FE exam you need to know all fundamental engineering
courses |
| Algebra, Analytic
Geometry, Trigonometry, Vector Algebra, Differential Calculus, Integral
Calculus, Vector Calculus, Differential Equations, Laplace Transforms,
Numerical Analysis, Statistics, Matrices, Statics, Mechanics of
Materials, Dynamics, Fluid Mechanics, Thermodynamics, Heat Transfer,
Mass Transport, Circuits, Chemistry, Economics, Materials Science,
Computers, Measurements & Instrumentation, Control Theory |
| |
| You
need to solve 180 difficult problems in 8 hrs or 2.67 minutes per
problem |
In engineering school
you were given 3 problems in a 1 hr exam or 20 minutes per problem,
and you thought THAT was a challenge
The only way for you to meet THIS NEW CHALLENGE is to be MASSIVELY
overprepared
To solve MASSIVE amounts of problems
|
| |
|
What does it take to
pass the engineering licensure exam |
|
1.Thorough
understanding of the material |
|
2. Working
accurately and fast on the exam
|
|
These skills can only be achieved by prolonged and focused
structured problem-solving practice |
|
Users are unable to achieve structured problem-solving
practice on their own, |
|
they get stuck too frequently and they get bogged down and
overwhelmed by the theory |
Users need a structured format where they can learn efficient
problem-solving procedures and algorithms
which they can apply on their own, |
|
thereby retaining control of their mastery and skill-building |
|
By hand-solving problems in such a format users can rapidly
gain understanding, speed and accuracy: |
|
The keys to passing the exam ! |
| |
|
30-hour refreshers
offered by industry at $
1000 to $
2000 |
|
cannot retrain you
in the 5 year engineering curriculum |
|
Refreshers offered by industry assume that you are very familiar
with the subjects |
|
and they devote around 2 hours per engineering course |
|
How can you relearn tough subjects
such as thermodynamics and feedback control in 2 hours ? |
| |
|
To pass the EIT exam you need
a structured problem-solving training program |
| |
|
You are searching
for a training provider |
|
who offers a structured problem-solving training program which
will |
|
train you to solve 1 problem per
2.67 minutes |
| |
|
ENSYS is the
ONLY
engineering training provider
|
|
with a 1000-hr structured problem-solving training program |
|
which is designed to prepare you succesfully for the exam |
|
by training you to hand-solve 10,000 problems |
|
with 50 to 100 hours of
problem-solving training per subject
|
| |
|
The ENSYS program |
|
is not only a
structured problem-solving training system |
|
it also serves as a time-management and study-system |
|
All your work is programmed and
organized |
|
Self-Study / Home-Study users do not
have to go it alone anymore |
|
The ENSYS program provides an online
infrastructure where |
|
all your work is scheduled |
|
You do not have to worry about |
|
what material to study |
|
when to study |
|
how to study |
|
what theory to study |
|
which problems to work |
|
how to reinforce and practice |
|
In the ENSYS system, there is no
reading of any text involved |
|
theory is condensed into
step-by-step procedures |
|
followed by user-assigned problems |
|
followed by a detailed discussion |
|
with the problems sequenced in
increasing difficulty-levels |
|
Users learn and master the material
by working problems: |
|
10,000 problems hand-solved by the
user |
|
resulting in an unprecedented |
| |
|
80%
PASS RATE ! |
| |
|
View The 1000-Hour, 10000-Problem EIT-FE Web Syllabus
|
| |
|
View EIT-FE Demo Sessions
|
| |
| The
ENSYS EIT-FE & PE Training Systems are Engineering Re-Education Programs |
| which
are designed to rebuild the user's |
| 5-year
engineering knowledge-base. They have been developed |
| over a time-period of
twenty years at 100,000 man-hours of development time |
| and they have been
succesfully delivered to engineering professionals since 1990 |
| The ENSYS EIT-FE & PE
Training Systems are active and evolutionary systems which |
| require 5000 man-hours
of annual maintenance, support and ongoing development |
| |
| Other
providers charge around $ 30 per hour |
|
view market rates in the professional training industry |
|
At 1000 hours, the ENSYS training
system has a market value of $ 30,000.00
|
| |
|
The ENSYS program training rate is as low as $ 1.60 per contact
hour |
| |
|
-
Assumptions
The review industry assumes:
1. that users learned the material
well in school.
2. that users have retained all their engineering
knowledge since graduation.
Therefore, industry offers 30-hour
cursory refreshers at training rates of $ 30 per
hour.
The review industry requires full prepayment upfront with no
refund after the class has started.
We believe that this
training solution is ineffective !
ENSYS makes more realistic assumptions:
1. that some users may not have learned the material well in school.
2. that some users did not work with most engineering knowledge after
graduation.
3. that some users have been out of school for a long
time.
4. that some users may not have taken courses in all
exam-subjects in school.
5. that some users may not have a formal
engineering background, but are eligible for the exams.
6. that some users have forgotten everything.
The half-life of
engineering knowledge is 2 years, which means that some users have
forgotten 50% of their knowledge every 2 years since graduation.
7.
that some users are too stressed, distracted and overwhelmed with work,
project deadlines, family and life responsibilities to study by
themselves.
8.
Attorneys planning to take the Patent Bar Exam to practice in the
field of patent law:
The Fundamentals of Engineering Exam (FE Exam) is a
prerequisite for
patent bar exam applicants under "Category C"
"Category C" states that if you do not have a BS in any Engineering
subject (Category A) or a BS in another scientific subject (Category B)
you must first pass the FE exam to show that you possess the required
technical and scientific training. The FE exam is developed and
administered by the
State Board of Engineering
Examiners in each state.
Click here for more
information about the patent bar exam
Based on these assumptions
we have designed highly effective structured
problem-solving Eit Exam Reviews which organize, plan and guide all
preparation and studying and which rebuild the user's knowledge base,
starting from the ground up.
-
ENSYS Eit Exam Reviews
The ENSYS Eit Exam Reviews
are offered with 3 components and 4 versions
Component 1: 1000 Hours Of Digital Whiteboard and Streaming Audio
Component 2: Prepster: a database of practice exams with 100,000 solved
exam problems
Component 3: Private Tutoring: 4 levels of private tutoring
Component 4: Live Workshop
The Exam Reviews are
delivered at the ENSYS Supersite:
The ENSYS Supersite
is an internet superstructure of 200 integrated websites
The Supersite is
designed as an internet engineering campus containing internet
engineering buildings.
Each internet building contains internet
classrooms, one classroom per website.
Users who register for a
training program are assigned a classroom where the training program is
delivered.
When it is time for training, users simply go to their
online engineering building, locate their online classroom and work in a
structured problem-solving environment.
ENSYS problem-solving Exam Reviews prepare the user for
engineering licensure
with 10,000 practice problems which are hand-solved by users.
To support the Exam Reviews
we developed a centralized database of two million documents:
handwritten problems and procedure sheets.
Our programs are offered at the lowest rates in the
professional training industry:
other providers offer 30-hour cursory refreshers at rates of $ 30 per
hour.
ENSYS offers Exam Reviews at rates which are 97% below the market, as
low as $ 1.60/hr ( compare
fees )
-
Safe
Registration: Limited Risk !
Unlike other training providers who require full prepayment upfront
with no refund after the class has started.
With ENSYS, users can try
the program in the 30-day trial period for only $ 95 ( refundable )
Users can sample the free demos to see
how we teach the material
-
ENSYS offers the ONLY serious
licensure preparation products on the market
there is NO comparison.
ENSYS is the ONLY provider
offering comprehensive problem-solving Exam Reviews.
We invented problem-solving Exam Reviews in 1985 (
RIMS teaching method )
Everyone else uses the traditional lecture-based format.
We
pioneered and succesfully delivered problem-solving Exam Reviews to
thousands of engineers and with over 60,000 hours of problem-solving
teaching experience we ARE the authority in engineering licensure
training.
We also deliver seperate engineering
problem-solving courses
including the component-subjects of the exam for academic,
professional and industrial users on a year-round basis which keeps our
teaching expertise sharp
No other provider offers this level of teaching expertise.
In the words of our users:
" there is no alternative to ENSYS "
read what ENSYS users
are saying
|
| |
|
-
What are the keys to passing the
engineering licensure exam ?
1.Thorough understanding of the
material
2. Working accurately and fast on the exam
These skills can only be
achieved by prolonged and focused structured problem-solving practice
This is exactly the issue:
Users are unable to achieve structured problem-solving practice on their
own, they get stuck too frequently and they get bogged down and
overwhelmed by the theory.
Users need a structured format where they can learn efficient
problem-solving procedures and algorithms which they can apply on their
own, thereby retaining control of their mastery and skill-building.
By hand-solving problems in such a format users can rapidly gain
understanding, speed and accuracy:
The keys to passing the exam !
In ENSYS Exam Reviews users
hand-solve 5000 to 10,000 problems in a structured, guided, interactive
format
Theory is first presented as a packet of information, a short,
step-by-step procedure.
Users then act on this packet of information and reinforce the theory by
hand-solving problems which are sequenced in difficulty-levels.
Each hand-solved problem is followed by a detailed discussion to further
reinforce the concepts just learned
and the cycle repeats with continued problem-solving.
Users build confidence by accurately working problems themselves, using
each problem to gain better understanding and proficiency.
Users see a dramatic and rapid
improvement in understanding and in problem-solving skills
Users develop understanding, speed and accuracy:
The keys to passing the exam !
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
